Mil-ivy industria metallum Advanced Sealing acrylic latex de primario ad optimum penetrando
application
Optimum enim est adhaesio et ferro similis subiectorum primers secundum decursus aquarum, et fluctus optimum physica et mechanica proprietatibus essent istae post pingere.
5. Quod est optimum amet pingere color lucis conservacione et custodia post remittit.
Est commendatur applicationem idoneam INCILE tutela fringilla leo, partes machinae, lux industriae apparatu, etc., ubi sit, requiritur magno praesidio.
Colo colui cultum technica notitia confusaque
Superficiem arida (L% miscibility) XV ℃ C <1h: 25'C <0.5h
Arida solidum (humiditas L%) 15'C <48h; XXV ° C <24b
Hits "kg.cm 'L
Aqua (L ± 5μm) 72h amet pingere, non Deteret invalidos, non auxilium lapsum non rubigo.
0.3 duritiam (duplex pendulum) mechanica amet proprietas probatio crassitudine (± 3jμm XXIII)
Adhaesione (Hegelian) Level I
Superficiem treatment et de iactaret superficiem materia sit ex libero humorem, oleum, ipsum acidum et cinis.
Details Velox
Cadmiae ferrum cute iaculat erugo et processus modos ut palma urente Sa2.5 gradu quo arena inspiratione fieri debent mechanice non expoliantur
Quibus fractis humeris chemica remouere tristique.
Cutis sine ferro cadmiae, sandblasted (shotblasted) ad Sa2.5 aut aer-activated, electrica agro instrumenta ad St3.
Vicifontem flamma messis et arearum arcu Firework correctione holocaustum: Molendum usque St3 elit.
Cum basi materia pingere vetus film, et rubigo removere solutam vetus pingere particulas includerent, ut harenae et St3 cum aer aut electrica sanding instrumenta.
Typical pictura potest esse sarcina fundatur in primario H902 decursus aquarum, quod solus usus seu generali exornantur topcoat, seu usus cum aliis products types de primario (necessitate iudicat de verificationem).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
